Loading clinical trials...
Loading clinical trials...
Showing 1-20 of 199 trials
NCT07405918
This study will evaluate the behavior of the implant-supported restorations (prosthesis) placed into the areas grafted with the 3D printed customized bone (personalized graft produced to fit a specific bone defect), as well as the volume contraction of the printed bone.
NCT04670965
This study is seeking to evaluate the binding of a commercially-available, recombinant human osteoinductive growth factor, rhBMP-2, to a human blood derived product scaffold, enhanced Platelet-rich fibrin (E-PRF), and the release of such a growth factor over time in an in vitro (laboratory) environment. The investigators will compare these release kinetics to those of the FDA approved carrier for rhBMP-2, an absorbable collagen sponge (ACS), a combination of E-PRF and ACS, and E-PRF alone.
NCT07521514
CGF membranes will be prepared using a swing-lock centrifuge. A full-thickness mucoperiosteal flap will be elevated in a narrow alveolar ridge. Implants will be inserted. Autologous bone chips will be harvested via bone scraping and used for augmentation, CGF membranes will be placed over the grafted area. Suturing of the mucoperiosteal flap. Radiographic evaluation of the bone density and tissue thickness will be performed by CBCT preoperatively, immediate postoperative and after the procedure by 4 months. Clinical evaluation of the tissue thickness using periodontal probe preoperatively, immediate postoperatively and after the procedure by 4 months
NCT07520903
This prospective comparative clinical study evaluated vertical and horizontal bone gain after guided bone regeneration using titanium-reinforced dense PTFE (TiR-dPTFE) membranes versus reinforced PTFE mesh (RPM) in patients requiring ridge augmentation prior to implant placement. Radiographic outcomes were assessed using CBCT at baseline, 9 months, and 12 months. Histological evaluation was performed in selected cases. Healing events and complications were recorded.
NCT06541548
The study aims to utilize medical devices, such as the Xtreme CT and XCT 3000, to assess bone and muscle microarchitecture for various pathologies. The devices provide crucial data on bone and muscle density, aiding in understanding fracture risks associated with conditions like rheumatoid arthritis and neurological disorders. Current methods like DXA scanning have limitations in predicting fracture risks accurately due to their inability to assess cortical and trabecular microstructure. The study emphasizes the importance of evaluating cortical porosity and trabecular volume loss, especially in conditions like post-menopausal osteoporosis and sarcopenia. Additionally, it explores the impact of neurological disorders, renal insufficiency, and endocrinopathies on bone health. Furthermore, the study aims to establish a control group to differentiate pathological changes from age-related variations. Expected outcomes include a comprehensive understanding of bone microarchitecture alterations across various pathologies and the potential to improve fracture risk estimation beyond conventional methods like DEXA scanning. Ultimately, the study anticipates facilitating better management strategies to reduce fracture risks associated with these conditions.
NCT06252324
The purpose of this study is to assess changes in peri-implant tissues and the effectiveness of a tissue-level surgical technique. This technique will be compared with a bone-level surgical technique. This is a post-marketing clinical investigation conducted in the Endodontics Department of the Dental Clinic at the University of Bologna. Patient recruitment and study conduction will follow the principles of the Declaration of Helsinki and adhere to major international guidelines (CONSORT). Implants will be placed using either a bone-level or tissue-level surgical technique, corresponding to implants positioned at the level of the gingival mucosa or submerged implants, respectively. Randomization (1:1 ratio) will be conducted before surgery to create two treatment groups. The experimental group (Tissue Level) (n=40) consists of implants that will be placed with the exposed neck (Tissue-level surgical technique). The control group (n=40) comprises implants placed at the bone level (Bone-level surgical technique). The surgeon will be aware of patient assignment during the implant insertion procedures. The surgical procedure to uncover the implant neck (control group) will be performed 3 months after implant placement. The experimental group (Tissue Level technique) will not require a surgical intervention. he following parameters will be assessed at 1, 6, 12, and 36 months after implant placement: Peri-implant parameters: Plaque score, Bleeding on Probing (BoP), and Papilla Index Radiographic parameters: Marginal Bone Level (MBL) Patient-Reported Outcome Measure (PROM): Post-operative pain (VAS) in the experimental group (non-submerged surgical technique) and the control group (submerged surgical technique).
NCT06527664
In this prospective multicenter study, a population of adult individuals consecutively treated for revision hips, requiring a custom-made acetabular implant for non-oncological reasons, will be included. The custom-made implant is a personalized implant produced using additive manufacturing, based on the pre-operative CT scan that details the bone damage. Patients eligible for this implant are those with severe acetabular bone damage Paprosky 3 (loss of the superolateral part and one of the two ventro-caudal walls). Preoperatively, the patient will undergo a clinical evaluation. Data will be collected on the patient's general health status with the Charlson score, the reason for revision, number of revisions, type of implant in place, and the time elapsed between the failed implant and the revision in question. The bone deficit will be studied through CT measurements according to qualitative and quantitative scales. During the surgery, information on intraoperative complications will be collected. In the postoperative period, perioperative complications will be collected according to the Clavien Dindo classification. The clinical radiographic evaluations will be carried out during outpatient follow-up visits at 1, 3, 12, 24, and 36 months after revision. They include the Harris Hip Score clinical score, the EQ-5D PROM, and the patient's satisfaction level (qualitative assessment in 4 grades: unsatisfied, slightly satisfied, moderately satisfied, fully satisfied). The positional parameters of the implant will be evaluated, as compared to the immediate post-operative X-ray: acetabular abduction, acetabular anteversion, center of rotation height, center of rotation medialization, and inclination of the custom-made component. From 12 months onwards, the osteointegration characteristics of the component will be assessed: presence of radial trabeculae at the interface, superolateral and inferior reinforcements, stress shielding, absence of radiolucent lines. Re-revision rates will be determined using the Kaplan-Meier method. The reasons for re-revision will be noted.
NCT05533528
The objective of this study will be to evaluate a new protocol for the surgical treatment of periodontal disease with two novelties: to make a single incision in the midline of the interproximal area to respect the vascular supply and preserve the granulation tissue with regenerative potential. The investigators will carry out a controlled and randomized clinical trial with a control group (n=25; modified Kirkland flap) and a test group (n=25; experimental surgical protocol: incision in the mid-interproximal area of the papilla and preservation of the granulation tissue). Clinical parameters will be taken at the time of surgery and 12 months follow-up: bleeding on probing (BoP), clinical attachment level (CAL), residual probing depth (rPD),Probing pocket depth reduction (PPDr), recession (REC), interproximal gingival recession (iGR), width of keratinized gingiva (KT), gain of supra-alveolar clinical attachment (SUPRA-AG), early wound healing index (EHI).
NCT07419269
The aim of this study is to determine whether jawbone augmentations using allogeneic and autogenous bone blocks lead to comparable three-dimensional clinical and radiological outcomes. In addition, the study seeks to investigate whether there are differences regarding safety, biocompatibility, complications, and PROMs. Furthermore, it aims to clarify whether differences exist between the two groups with respect to implant condition (one year after implantation and during annual follow-ups for up to five years).
NCT05237570
This study aims to describe a new approach for the reconstruction of the alveolar process in the sinus area. This minimally invasive approach will access the maxillary sinus through the alveolar process, elevating the sinus membrane in the area immediately above it. The regeneration may be achieved in the specific area required for dental implant placement, reducing the morbidity of the procedure.
NCT07365852
This study compares the accuracy of osteotomies positions using patient specific guides for onlay bone shells harvested from the chin then the graft positioning for 3D upper anterior ridge augmentation using patient-specific tooth-supported guide versus free hand technique
NCT07360015
This research aims to compare between using OT Equator abutments for constructing implant supported fixed mandibular prosthesis with different number of screws (3 screws vs 4 screws) regarding the marginal bone height alteration around the implants through radiographic evaluation.
NCT05241548
BMAC is used on 3D printed PCL scaffold for horizontal ridge augmentation in aesthetic zone , BMAC contains MSCs which can differentiate in osteogenic medium into osteoblasts which can lay down bone
NCT07324213
Surgical removal of impacted mandibular third molars is a common procedure that may be associated with postoperative pain, swelling, limited mouth opening, and delayed bone healing. Various regenerative techniques are used to improve healing outcomes after tooth extraction. This study evaluated whether autologous platelet concentrates (advanced platelet-rich fibrin \[A-PRF+\] and concentrated growth factors \[CGF\]) and photobiomodulation using low-level laser therapy can improve healing after mandibular third molar extraction. Participants requiring surgical removal of a mandibular third molar were randomly assigned to one of six treatment groups. Depending on the group, patients received standard wound closure alone, photobiomodulation, placement of autologous platelet concentrates into the extraction socket, or a combination of platelet concentrates and photobiomodulation. Postoperative pain, swelling, mouth opening, and early wound healing were assessed during the first postoperative week. Bone regeneration within the extraction socket was evaluated using radiological imaging several months after surgery. All procedures used in this study are commonly applied in clinical practice and are considered safe. The results of this study may help identify the most effective approach to improve healing and reduce postoperative discomfort following mandibular third molar extraction.
NCT07353619
This retrospective study will evaluate the clinical performance of maxillary All-on-X(full-arch implant-supported rehabilitation) implant rehabilitation using stackable guided surgery and immediate loading. Implant survival and peri-implant outcomes will be assessed over a 2-year follow-up, with regression analysis will be used to investigate the influence of surgical and prosthetic variables, including basal seating guide design.
NCT07339605
The goal of this clinical trial is to radiographically assess the effectiveness of minimally invasive non-surgical technique (MINST) combined with local administration of sodium hypochlorite gel (Perisolv®) and 1.6% cross-linked hyaluronic acid (HA, Hyadent BG®) compared to a neutral formulation of EDTA (Prefgel®) and enamel matrix derivative (EMD, Emdogain® FL) in periodontal regeneration. The main questions it aims to answer are: * ¿Does the combination of MINST with the local administration of sodium hypochlorite gel and 1.6% cross-linked hyaluronic acid show a potential for periodontal regeneration similar to evaluating clinical and radiographic variables compared to a neutral formulation of EDTA and enamel matrix derivative? * ¿What is the patient perception and satisfaction with the received treatment? Researchers will compare A (MINST with Perisolv® + Hyadent BG®), B (MINST with PrefGel® + Emdogain® FL) and C(MINST without any bioactive product). The sample will be distributed according to the following treatments: * Experimental group: Scaling and root planing (SRP), MINST with Perisolv® + Hyadent BG®. * Active comparator group: SRP, MINST with PrefGel® + Emdogain® FL. * Control group: SRP, MINST without any bioactive product. Patients will be screened by a first visit in which they will be assigned their periodontal status. If they meet the eligibility criteria, they will be treated according to the EFP clinical guideline for periodontitis treatment: step I and step II.If the periodontal defect persists at the 12-week re-evaluation, patients will be randomised to treatment A, B or C. After the intervention, all participants will be checked weekly for the first 6 weeks to remove accumulated plaque, and every 3 months for 1 year. Periodontal parameters will be re-evaluated 6 and 12 months after periodontal regenerative intervention.
NCT06693921
n the current study, AI-assisted 3D ridge augmentation of combined vertical and horizontal deficient ridges utilizing allogenic dentin block versus allogenic dentin shell graft will be assessed.
NCT07330232
This randomized controlled clinical study, titled "Periosteal sutures for fixation of composite bone substitutes in guided bone regeneration: a randomized controlled clinical study," is being conducted at the Dental Unit of Hospital San Camilo and is sponsored/funded by SigmaGraft Biomaterials. Purpose: The purpose of this study is to evaluate whether using a periosteal stabilization suturing technique improves outcomes in guided bone regeneration in the anterior maxilla when a composite bone graft substitute is used in conjunction with dental implant installation. What participation involves: Participants will undergo clinical assessments and data collection by the research team according to the study protocol. As part of study-related imaging, participants will receive two cone-beam computed tomography (CBCT) scans, which involve exposure to ionizing radiation. To reduce radiation exposure, CBCT imaging will be performed at a private imaging center rather than using a conventional hospital CT scanner, and participants will use a lead apron for additional protection. Potential benefits and risks: No direct benefit is expected for participants. However, the information gained may help improve future treatment approaches for patients requiring dental implants in the anterior maxilla with associated bone grafting procedures. The main risks described relate to exposure to ionizing radiation from CBCT imaging, and measures are in place to minimize this exposure. Privacy and voluntary participation: Participant confidentiality will be protected. Study information will be stored securely with restricted access, and analyses will use de-identified data. Participation is voluntary, and participants may withdraw at any time without penalty or loss of benefits to which they are otherwise entitled.
NCT05332626
This study aims to evaluate the effect of Lactobacillus acidophilus supplementation on calcium status and bone densitometry in postmenopausal women in a randomized, double-blind placebo-controlled study.
NCT04779216
This protocol is a randomized, double-blind, placebo-controlled clinical trial which aims to investigate the effect of romosozumab on BMD in women with anorexia nervosa. The investigators will also investigate the safety of romosozumab in women with anorexia nervosa. The investigators hypothesize that 12 months of romosozumab administration will result in an increase in bone mineral density, increase in markers of bone formation and decrease in markers of bone resorption, and improvement in bone microarchitecture in osteopenic women with anorexia nervosa compared with placebo. In Phase 2, participants will receive a single infusion of open-label zoledronic acid (an intravenous bisphosphonate) 5 mg after the initial 12-month administration of romosozumab or placebo. The investigators hypothesize that 12 months of romosozumab followed by a single intravenous infusion of open-label zoledronic acid will result in a greater increase in BMD compared to 12 months of placebo followed by a single intravenous infusion of open-label zoledronic acid. Within the group of women who receive sequential therapy with 12 months of romosozumab followed by a single intravenous infusion of zoledronic acid, the investigators hypothesize BMD will be maintained between 12 and 24 months following administration of zoledronic acid.