Air Polishing Effect on Biological, Clinical and Patient-reported Experience Among Epileptic and Non-epileptic Children

The treatment of each quadrant was administered sequentially, beginning with the upper right quadrant. Treatment duration was measured in seconds from the start of treatment in each quadrant until the removal of all disclosed biofilm and calculus. This process was repeated for each quadrant individually. And intra-oral photographs were taken before, immediately after treatment, and at follow-up time. Conventional treatment was conducted after biofilm disclosure by a rubber cup and prophylaxis paste spearmint (Kemdent Works, Purton. Swindon, Wiltshire. SN5 4HT, UK). The power setting was between 70% and 100%. The rubber cup was used until all biofilm was removed, then, if present, calculus was removed by Electro Medical Systems (EMS) ultrasonic scaler with a power setting between 3-6 on the Airflow control panel. For Airflow, treatment was conducted after biofilm disclosure. The powder chamber of the air polishing device was filled with low-abrasive erythritol powder, according to the manufacturer's instructions. The tip of the handpiece was positioned at an angle of 70° to the surface of the tooth to be polished at 3 mm from the tooth surface. Once activated, a non-stop movement from mesial to distal and distal to mesial in a smiley face shape starting from the gingival sulcus and moving upwards coronally to the incisal to cover the entire clinical crown was performed, with a power setting ranging from 3-6 on the control panel of the airflow device. EMS ultrasonic scaler was used to remove calculus if present with a power ranging from 3-6.