Evaluation of Ability to Detect Bowel Gas During Laparoscopic Right Colectomy With Intracorporeal Anastomosis

The goal of this study is to test a novel device that can detect bowel gas leakage from perforation and alert the surgeon during the operation by evaluating the gases present in the insufflated abdomen during surgery. During laparoscopic surgery, CO2 is inserted into the abdominal cavity in order to perform the operation. This is a dynamic process as insufflation is constant during the entire procedure to maintain constant pressure and compensate for any small leaks due to the insertion and retrieval of instruments. This study will determine the ability of a novel device to be attached to a standard trocar during the operation and periodically draw a small amount of gas from the abdomen to evaluate the gas and accurately detect gaseous content from the bowel. Before the device can be used to detect bowel perforations, first the investigators must ensure that it can accurately detect bowel gas in an insufflated abdomen. The Investigational device, Perf-AlertTM, consists of a 15" x 13" x 7" unit containing gas sensors and valves, a small box containing a one way, ultra-low pressure pump, user controls (buttons), and software algorithms, which control the operation of the device ( Image1). It is used in conjunction with a single-use, disposable kit consisting of sterile tubing and filters used for sample collection and transport (Image 2). The sensing unit will be connected via a sterile tube/filter set to any trocar port in use during the procedure. At specific time points during the procedure, a one-way valve will be opened and the unit's pump turned on pulling small aliquots of gas from the abdominal cavity to the sensing unit. The system's architecture is configured such that sample collection, transport, analysis, and feedback occur in a single step such that sample collection and sensor feedback occur in real-time. A standard laptop running an analytical software program is connected to the unit to record and log sensor readings. No changes to the device are anticipated during the course of the study.