Focal Prostate Imaging With CLE and OCT

Study design: This is an investigator-initiated, prospective in-vivo safety and feasibility study with two procedures. Procedure 1 (AMC): Patients that are indicated for transperineal template mapping biopsies (TTMB) are included for procedure 1 and will receive transperineal CLE or OCT measurements prior to TTMB. Procedure 1 is to test the technical feasibility and safety of in-vivo focal imaging with CLE and OCT. Only if transperineal CLE or OCT measurements are possible, the investigators proceed with procedure 2. For procedure 1: 4 patients that are scheduled for TTMB; 2 patients for CLE and 2 patients for OCT. Procedure 2 (VUmc): Patients scheduled for a robot-assisted laparoscopic prostatectomy (RALP) will be included in procedure 2 and receive transperineal CLE or OCT measurements prior to their surgery. Results will be correlated with histology by correlating biopsies during the TTMB procedure or with RALP the measurement trajectory will be marked. After the RALP, the prostate will be cut exactly through the measurement trajectory for whole mount coupes. In high-risk of high-intermediate-risk patients receiving an extended pelvic lymph node dissection with the RALP, ex-vivo CLE measurements will be performed. For procedure 2: 10 patients that are scheduled for RALP; 5 patients for CLE and 5 patients for OCT. Intervention: Transperineal CLE or OCT measurements will be performed directly prior to the TTMB or RALP. The CLE and OCT probes are inserted by a needle with the same diameter as a biopsy gun. In the case of RALP, measurement trajectories will be marked for histopathology correlation. Intervention: Transperineal CLE or OCT measurements will be performed directly prior to the TTMB or RALP. The CLE and OCT probes are inserted by a needle with the same diameter as a biopsy gun. In the case of RALP, measurement trajectories will be marked for histopathology correlation.